12 x Versarray 112 Line Array Cab, 600W RMS

You could have these at your event!

The Versarray 112 line array speaker cabinets house a 12″ 500W RMS speaker driver and 2 x 4″ 100W RMS high frequency ribbon drivers (in place of the old style compression drivers). This speaker is bi-amplified, using two amplifiers to power the low frequency and the high. Combined, all 12 of these cabinets run at a hefty 7,200W RMS. These speakers can be ground stacked, reaching to a height of 3.2M from on top of one of the Versarray subs. These speakers can also be flown or hung from either trussing, a lift, or from purpose made point loads within venues. We currently use two Mackie M3000 amplifiers to power the low frequency driver, and two Art SLA4 amps to power the ribbon drivers.

pv-va112

Tech spec:

  • Low-Frequency Power Handling: 1000 watts program, 2000 watts peak
  • Frequency Response: 100 HZ to 24 kHz
  • 90° H x 15° V coverage pattern (per line array module)
  • Single 12″ vented Black Widow® Neo woofer with 4″ voice coil
  • 320 watts peak
  • HF-16/4 ohms selectable, LF-8 ohms
  • Two 4.75″ ribbon drivers on Waveguide
  • Two Neutrik® four-pin Speakon® inputs
  • Sound Guard™ tweeter protection
  • Dual stand-mount cups: one perpendicular and one 5 degrees angled down
  • High-Frequency Power Handling: 160 watts program
  • Durable GatorHyde® finish
  • Weight Unpacked: 55.12 lb(25 kg)
  • Weight Packed: 60.85 lb(27.6 kg)
  • Width Packed: 17″(43.18 cm)
  • Height Packed: 27.25″(69.215 cm)
  • Depth Packed: 14.5″(36.83 cm)